Answers to common questions about our 3D printed collectibles, resin models, print quality, preparation, assembly and ordering.
ROAR3D produces made-to-order resin 3D prints for collectors and customers across the UAE. If you need help with a specific model or size, contact us directly on WhatsApp.
A traditional resin cast is produced from a mould - resin is poured into the mould and left to cure. Once set, the casting is ready. Many bust and figure masters ore already produced by 3D printing digitally sculpted pieces for the casting process. Casting is usually the preferred manufacturing process due to cost and time to moss produce a high-quality product.
Prior to assembly, mould lines would need to be removed using fine blades, files and sandpaper. Different manufacturers will present different standards of finish. Some kits are almost ready for assembly and painting with minimal clean-up. Others will require more clean-up and preparation, including some filling where ports ore joined, etc.
Our resin 3D prints are produced with MSLA 3D printers with details as fine as 22 microns. 3D printing technology has and continues to advance rapidly, making detail and accuracy more attainable at a reasonable cost. This is why Our 3D printed models are now being sold to consumers rather than only one-off commissions for production purposes.
3D printer work by curing uv resin layer by layer to produce a model. Support structures are needed to print the model. These supports are placed in critical positions around the model to ensure that the whole model is supported and not suspended in air.
We ore using MSLA resin printers, which are different lo the more common FDM machines. Both print objects in layers, but MSLA resin printers are capable of printing in much smaller increments, down to microns. FDM machines are those which extrude heated plastic filament onto a plate, while resin printers use liquid UV resin that hardens when exposed to UV light. An LED screen masks a layer, allowing UV light to harden the masked area. How fine the details possible is dependent on the pixel density of the LED Screen. The denser the pixels, the higher detail is visible on the final print.
Once the 3D print is complete, the model is washed in lsopropyl Alcohol (IPA) to remove any uncured liquid resin; the supports are manually removed and then il is further cured under UV light to cure totally.
30 Printing has some advantages over resin costing, in that it is possible to have more fine intricate details and deep undercuts, etc. A 3D print is also much cheaper-to purchase than o traditional cast as it is a more direct to the customer and has less upfront cost as opposed to traditional casting.
The UV resin can be more brittle than a traditional resin casting. especially where parts ore extremely thin and delicate. The UV resin however is still perfectly fine tor painting and is used by many tabletop gamers for small models without issue.
We obtain all the legal commercial licenses to 3D print directly from the creators.
Commercial 3D printing is only possible when a commercial license is obtained from the rights holders. Licenses are limited to physical 3D prints and prohibit distribution of digital files. Please do not support shops that have not supported or gained the original creators’ permission; doing so is the same as buying recasted models.
Select from the range of 3D prints in our store (these are identified by “3D Print” in the products title), add it to your shopping cart, and checkout as usual.
We will process your order, and your model is prepared for printing. Printing can take between 3 hours and 20 hours, depending on the complexity and the size of the selected figure. Once printed, all supports are removed, the figure is cleaned and cured to our best ability. All parts are given a final check and then packaged securely, ready to dispatch.
Please note that 3D prints are printed on-demand and will be dispatched within 7-15 working days, depending on the size of the print queue.
We print at a layer height of 0.03 (30 microns). 0.03mm offers high detail the matches the printers resolution for uniform pixel size. On certain areas of the model, most notably in flat places, some stepping/visibility of the layers may occur (Vocel lines). However, this is barely visible at 0.03 mm and can be easily fixed with a light sanding or scrape of a blade and would be smooth once painted.
We remove all supports before the models are cured to leave as few marks as possible on the model., however, the occasional few may be missed. These are easily removed, either with a blade or by sanding and some model filler.
The models have been cleaned in 100% IPA and completely cured so are safe to handle. If any residue has been left from the sanding and cleaning of the model you can use some worm soapy water and a toothbrush to gently wash awoy amy dust or residue. Parts con be brittle so be careful when doing so.
Any marks from supports con be sanded down and the small pits filed with model filler. Top tip: it will be much easier to see any blemishes once the model is primed, areas can be quickly fixed and primer touched up.
The resin will continue to cure when exposed to UV light, even directly sunlight. These will lead to it becoming more brittle. Priming and painting the resin will protect from UV light and stop further curing.
For your own safety, please wear a mask when sanding and cleaning up resin products as resin particles are harmful.
3D printed figures are printed in parts and do require assembly. In doing so, we can maximize the detail of the model and minimize the supports distorting the details.
However, in instances where the customer requests a fully assembled model (depending on availability), this could be arranged with a minimal extra charge.
Cost is based on the scale size of the requested 3D printed model. Normal scale size ranges from 1/72 up to 1/9 or bigger as per the customer demand, if applicable.
ROAR3D is based in Sharjah and serves customers across the UAE, including Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain.
Our range includes made-to-order resin collectibles, figurines, character models, scale models, cosplay pieces and other detailed 3D printed products.
Ask us about a collectible, available size, assembly or custom 3D printing request.
Chat With Us on WhatsApp